Here are some common methods for reducing material waste during the color sorting process:
1. Pre-clean raw materials
Remove dust, chaff, oversized impurities and control moisture before feeding. Dust and surface moisture will cause false detection and unnecessary rejection of good products.
2. Optimize feeding for uniform flow
Adjust the vibration feeder to keep material falling in a single, stable layer. Overfeeding or clumping leads to overlapping grains and higher carryover of good products.
4. Calibrate ejection system accurately
The working air pressure of color sorter is usually set between 0.3 and 0.5 MPa, the settings need to be specific according to the size of the materials. The air pressure of the air compressor's source is 0.6 ~ 0.8 MPa.Too strong air blast will blow good material away together with defective ones.It is recommended to check whether the air pressure is within the normal range before using color sorter each time.
5. Re-sort the reject products
Collect the rejected material and run it through a second pass. This recovers usable grains trapped in the waste stream, which is widely used in grain sorting lines.
6. Keep optical components clean
Clean lenses, light sources and observation windows regularly. Dust buildup distorts imaging and triggers false ejection.
7. Regular maintenance
Check ejector valves, chutes and pipelines to avoid unstable sorting performance.